Ducting Supports

Product Details:

1601

Product as PDF file

Mounting element for rectangular ducts installed directly under the ceiling, or for suspended installation when using a threaded rod.
Types SL and SZ allow for soundproof installation, also according to DIN 4109.
The adjustability in the oblong hole qualifies the adjustment of bore variations and building tolerances. For assembly on ducts with channels and T-head Bolts it guarantees the adequate distance in order to avoid structure borne sound when using versions SL and SZ.

Types SL and SZ are equipped with a pre-assembled sound absorption head including a (dia. 10.5 mm) metal bush.

Fixing to duct with rivets (4 mm), sheet metal screws (4 mm) or M8 bolts.

Product Details:

Mounting element for rectangular, particularly for vertically running ducts. In combination with Sound Absorber SDE 1 suitable for soundproof fixing of ducts according to DIN 4109.

Fixation to duct with rivets (5 mm) or M10 bolts.

Product Details:

1621

Product as PDF file

Mounting Angle for rectangular ducts installed directly under the ceiling, or for suspended installation when using a threaded rod.
Types A-SL and A-SZ allow for soundproof installation also according to DIN 4109.

Types A-SL and A-SZ are equipped with pre-assembled sound absorption head.

Fixing to the duct with rivets (ø 4 - 5 mm), sheet metal screws (ø 4 - 5 mm) or M8 bolts.

Product Details:

Ducting Clamp designed for installing spiral-seam ducts according to DIN 24145 for industrial ventilation systems.

Without bolts and nuts. Without connection nut.

Basically, two-sided fixing to threaded rods is recommended.

Product Details:

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Suitable for soundproof installation according to DIN 4109.

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.

Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).
After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.

Product Details:

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Suitable for soundproof installation according to DIN 4109.

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.

Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).
After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.

Product Details:

Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.

With glued-in rubber profile. Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging

Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture). After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.